I’m surprised and confused. Seems like not much difference in the three methods: If you set the gain per method 1, using a meter, making all signals equal level on meter, then the faders won’t be “all over the place”, they would look like method 3, the lead vocal would be the highest, etc. and all instruments would be about the same volume if all faders are at unity, except for volume
Switch to the “Levels” tab. Open the Levels tab. Adjust the slider to increase or decrease the sound level. Adjust the volume from the Sound Control Panel applet. When done, click OK to close the applet. These are all the methods to adjust the volume levels on a Windows 11/10 computer.
Open Windows Settings using WIN + I. Navigate to System > Sound. Under Advanced sound options, click on App volume and device preferences. Individual apps with Volume, output, and input. To reset
Aftermaster Pro uses a patented process to improve audio throughout its entire frequency range so you don't need to continually reach for the controller. This device usually costs $180, but Daily
The slider that you can use to control the volume of the system master and adjust all sounds. On the right side there are two dropdown menus for selecting the standard speaker and the standard microphone. These are the same settings that you can adjust on the sound page. Back to the top . 3.)
Add, remove, or move a setting. From the top of your screen, swipe down twice. At the bottom left, tap Edit . Touch and hold the setting. Drag the setting to where you want it. To add a setting, drag it up from "Hold and drag to add tiles." To remove a setting, drag it down to "Drag here to remove."
Right-click on the new shortcut and edit Properties. On the Shortcut tab, set the box “shortcut key” to your prefrence. For example: CTRL + ALT + V, and hit OK. Now you can press your shortcut keys and the volume control box will popup. Then use the UP and DOWN arrows to change the volume, and ESC to close.
Aside from your PC's sound control panels, you can also adjust your laptop's sound using Spatial Sound Settings and Volume Mixer: To access Volume Mixer, all you need to do is access the sound
Without changing this signal level adjust the level controls on each piece of equipment following, including the power amplifiers, so it is just below its maximum output. You will find that the input level controls on the power amplifier will end up being set anywhere from 10 dB to over 20 dB of attenuation.
.
